X-ray beam hardening correction for measuring density in linear acceleratorindustrial computed tomography

Get Citation
ZHOU Ri-Feng, WANG Jue and CHEN Wei-Min. X-ray beam hardening correction for measuring density in linear acceleratorindustrial computed tomography[J]. Chinese Physics C, 2009, 33(7): 599-602. doi: 10.1088/1674-1137/33/7/018
ZHOU Ri-Feng, WANG Jue and CHEN Wei-Min. X-ray beam hardening correction for measuring density in linear acceleratorindustrial computed tomography[J]. Chinese Physics C, 2009, 33(7): 599-602.  doi: 10.1088/1674-1137/33/7/018 shu
Milestone
Received: 2008-07-03
Revised: 2009-03-10
Article Metric

Article Views(3961)
PDF Downloads(715)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

X-ray beam hardening correction for measuring density in linear acceleratorindustrial computed tomography

    Corresponding author: ZHOU Ri-Feng,

Abstract: 

Due to X-ray attenuation being approximately proportional to material density,it is possible to measure the inner density through Industrial Computed Tomography (ICT) images accurately. In practice, however, a number of factors including the non-linear effects of beam hardening and diffuse scattered radiation complicate the quantitative measurement of density variations in materials. This paper is based on the linearization method of beam hardening correction, and uses polynomial fitting coefficient which is obtained by the curvature of iron polychromatic beam data to fit other materials. Through theoretical deduction, the paper proves that the density measure error is less than 2% if using pre-filters to make the spectrum of linear accelerator range mainly 0.3 MeV to 3 MeV. Experiment had been set up at an ICT system with a 9 MeV electron linear accelerator. The result is satisfactory. This technique makes the beam hardening correction easy and simple, and it is valuable for
measuring the ICT density and making use of the CT images to recognize
materials.

    HTML

Reference (1)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return