Physical design of a 10 MeV LINAC for polymer radiation processing

FENG Guang-Yao; PEI Yuan-Ji; WANG Lin; ZHANG Shan-Cai; WU Cong-Feng; JIN Kai; LI Wei-Min

doi:10.1088/1674-1137/33/S2/035

Chinese Physics C> 2009, Vol. 33> Issue(S2) : 135-138 DOI: 10.1088/1674-1137/33/S2/035

Physical design of a 10 MeV LINAC for polymer radiation processing

Abstract
HTML
Reference
Related

PDF

Abstract：
In China, polymer radiation processing has become one of the most important
processing industries. The radiation processing source may be an electron beam accelerator or a radioactive source. Physical design of an electron beam facility applied for radiation crosslinking is introduced in this paper because of it's much higher dose rate and efficiency. Main part of this facility is a 10 MeV travelling wave electron linac with constant impedance accelerating structure. A start to end simulation concerning the linac is reported in this paper. The codes Opera-3d, Poisson-superfish and Parmela are used to describe electromagnetic elements of the accelerator and track particle distribution from the cathode to the end of the linac. After beam dynamic optimization, wave phase velocities in the structure have been chosen to be 0.56, 0.9 and 0.999 respectively. Physical parameters about the main elements such as DC electron gun, iris-loaded periodic structure, solenoids, etc, are presented. Simulation results proves that it can satisfy the industrial requirement. The linac is under construction. Some components have been finished. Measurements proved that they are in a good agreement with the design values.

References

[1]

. FENG Guang-Yao, PEI Yuan-Ji, SUN Hong-Bing. Designof An Electron Linear Accelerator Applied for Sterilizing Anthrax-bacilus in Mails. HEP NP, 2006, 30(Supp.I):1202. Thomas P. Wangler. Principles of RF Linear Accelerators,Published in Canada, 1998. 78-80, 218-2193. FENG Guang-Yao, PEI Yuan-Ji, JIANG Dao-Man. Designof an Electron Gun in Linac for Food Irradicidation. Nu-clear Techniques, 2006, 29(9): 650-6544. Editorial Committee of Vacuum Tube Design Manual. Se-ries of high pulse electron gun. Beijing: Defence Industry Press, 1979. 123-1255. FENG Guang-Yao, WANG Lin, WU Cong-Feng et al. Base-line Design of Hls Linac Upgrade. EPAC2008, 2019-20216. YOUNG L M, Billen J H. Parmela, LA-UR-96-1835, Rev.,2005

[1]	ZHU Jun , ZHANG Huang , PENG Shi-Xiang , REN Hai-Tao , XIA Lian-Sheng , WANG Wen-Dou , YANG Zhi-Yong , SHEN Yi , SHI Jin-Shui , ZHANG Lin-Wen , DENG Jian-Jun . Beam transport design for a 1 MeV prototype dielectric wall accelerator. Chinese Physics C, 2014, 38(4): 047001. doi: 10.1088/1674-1137/38/4/047001
[2]	ZHANG Xiao-Hu , YUAN You-Jin , XIA Jia-Wen , YIN Xue-Jun , DU Heng , LI Zhong-Shan . Conceptional design of a heavy ion linac injector for HIRFL-CSRm. Chinese Physics C, 2014, 38(10): 107002. doi: 10.1088/1674-1137/38/10/107002
[3]	ZHU Hong-Yan , DONG Lan , LI Bo . Design and simulation of a wire position monitor for cryogenicsystems in an ADS linac. Chinese Physics C, 2014, 38(8): 087001. doi: 10.1088/1674-1137/38/8/087001
[4]	LI He-Ting , JIA Qi-Ka . Physical design of a wavelength tunable fully coherent VUV source using a self-seeding free electron laser. Chinese Physics C, 2014, 38(5): 058101. doi: 10.1088/1674-1137/38/5/058101
[5]	LI Ji , PEI Yuan-Ji , HU Tong-Ning , CHEN Qu-Shan , FENG Guang-Yao , SHANG Lei , LI Cheng-Long . Design of an electron gun for terahertz radiation source. Chinese Physics C, 2014, 38(4): 047004. doi: 10.1088/1674-1137/38/4/047004
[6]	HU Tong-Ning , CHEN Qu-Shan , PEI Yuan-Ji , LI Ji , QIN Bin . Physical design of FEL injector based on the performance-enhanced EC-ITC RF gun. Chinese Physics C, 2014, 38(1): 018101. doi: 10.1088/1674-1137/38/1/018101
[7]	PENG Quan-Ling , WANG Bing , CHEN Yuan , YANG Xiang-Chen . Physical design of superconducting magnet for ADS injection Ⅰ. Chinese Physics C, 2014, 38(3): 037002. doi: 10.1088/1674-1137/38/3/037002
[8]	SUN Lie-Peng , ZHAO Hong-Wei , SUN Zhou-Ping , HE Yuan , SHI Ai-Min , XIAO Chen , DU Xiao-Nan , ZHANG Cong , ZHANG Zhou-Li . Design study of the SSC-LINAC re-buncher. Chinese Physics C, 2013, 37(2): 027002. doi: 10.1088/1674-1137/37/2/027002
[9]	JIAO Yi , GUAN Xia-Ling , SATOGATA Todd , FANG Shou-Xian , WEI Jie , TANG Jing-Yu , CHEN Yuan , QIU Jing , SHU Hang . Physical design of scanning gantry for proton therapy facility. Chinese Physics C, 2010, 34(3): 394-397. doi: 10.1088/1674-1137/34/3/017
[10]	TANG Hua-Ping , TANG Chuan-Xiang , LIU Yao-Hong , ZHANG Hua-Yi , CHEN Huai-Bi . Design of Miniature and Self-Shielding Electron-Beam Radiation Processing System. Chinese Physics C, 2008, 32(S1): 250-252.
[11]	SUI Yan-Feng , MA Hui-Zhou , CAO Jian-She , MA Li . Design and simulation of the wire scanner for the injector linac of BEPCⅡ. Chinese Physics C, 2008, 32(5): 397-399. doi: 10.1088/1674-1137/32/5/015
[12]	LIU Hua-Chang , WANG Xiu-Long , FU Shi-Nian . Design Study on an Electron Linac for Irradiation Processing with a High Capture Efficiency. Chinese Physics C, 2006, 30(6): 581-586.
[13]	Li Panlin , Li Zhiliang , Kong Xiangjing . EFR-DWBA Analysis of α-Particle Induced Reactions on Nuclei ^10,11B at 31.2MeV. Chinese Physics C, 1994, 18(S1): 87-94.
[14]	LUO Zi-Hua , WANG Shu-Hong . COMPUTATION RESEARCH ON THE BEAM TRANSVERSE MOTION FOR THE 35MeV BEIJING PROTON LINAC. Chinese Physics C, 1988, 12(6): 793-798.
[15]	The Electron LINAC Department . THE 250MeV SECTION OF BEPC 1.1/1.4GeV e^± LINAC. Chinese Physics C, 1988, 12(3): 365-371.
[16]	Electron Linac Laboratory . The 250 MeV Section of BEPC 1.1/1.4 GeV e^± Linac. Chinese Physics C, 1988, 12(S1): 19-26.
[17]	Luo Zihua , Wang Shuhong . Computational Research on Beam Transverse Motion for 35 Mev Beijing Proton Linac. Chinese Physics C, 1988, 12(S3): 229-236.
[18]	LI Jian-Ping , WU Jing-Min , LIU Shu-Dong , TANG E-Sheng . MEASUREMENT OF PULSED NEUTRON FLUX AND DOSE EQUIVALENT RATE FOR 30MeV ELECTRON LINAC. Chinese Physics C, 1987, 11(3): 314-320.
[19]	LUO Zi-Hua , WANG Shu-Hong . BEAM MATCHING CALCULATIONS IN TRANSVERSE MOTION FOR THE 10MeV BEIJING PROTON LINAC. Chinese Physics C, 1985, 9(2): 191-199.
[20]	LUO Zi-Hua , WANG Shu-Hong . ADJUSTMENT OF THE MEAN AXIAL ELECTRIC FIELD IN THE 10 MEV ACCELERATING CAVITY. Chinese Physics C, 1984, 8(2): 185-190.

Access

Get Citation

FENG Guang-Yao, PEI Yuan-Ji, WANG Lin, ZHANG Shan-Cai, WU Cong-Feng, JIN Kai and LI Wei-Min. Physical design of a 10 MeV LINAC for polymer radiation processing[J]. Chinese Physics C, 2009, 33(S2): 135-138. doi: 10.1088/1674-1137/33/S2/035

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2009-01-05
Revised: 1900-01-01

Article Metric

Article Views(4020)
PDF Downloads(643)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Physical design of a 10 MeV LINAC for polymer radiation processing

Corresponding author: FENG Guang-Yao,

Received Date: 2009-01-05

Accepted Date: 1900-01-01

Available Online: 2009-01-08

Abstract:

In China, polymer radiation processing has become one of the most important
processing industries. The radiation processing source may be an electron beam accelerator or a radioactive source. Physical design of an electron beam facility applied for radiation crosslinking is introduced in this paper because of it's much higher dose rate and efficiency. Main part of this facility is a 10 MeV travelling wave electron linac with constant impedance accelerating structure. A start to end simulation concerning the linac is reported in this paper. The codes Opera-3d, Poisson-superfish and Parmela are used to describe electromagnetic elements of the accelerator and track particle distribution from the cathode to the end of the linac. After beam dynamic optimization, wave phase velocities in the structure have been chosen to be 0.56, 0.9 and 0.999 respectively. Physical parameters about the main elements such as DC electron gun, iris-loaded periodic structure, solenoids, etc, are presented. Simulation results proves that it can satisfy the industrial requirement. The linac is under construction. Some components have been finished. Measurements proved that they are in a good agreement with the design values.

HTML

Reference (1)

Physical design of a 10 MeV LINAC for polymer radiation processing

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article