Numerical simulation and design of a thermionic electron gun

Nijatie A

doi:10.1088/1674-1137/40/5/057003

Chinese Physics C> 2016, Vol. 40> Issue(5) : 057003 DOI: 10.1088/1674-1137/40/5/057003

Numerical simulation and design of a thermionic electron gun

Nijatie A

1.
Plasma Physics and Nuclear Fusion Research School, Nuclear Science and Technology Research Institute, AEOI, PO Box 14155-1339, Tehran, Iran

Abstract
HTML
Reference
Related

PDF

Abstract：
This paper reports the simulation of an electron gun. The effects on the beam quality of some parameters on the beam quality were studied and optimal choices were identified. It gives numerical beam qualities for a common electrostatic triode gun, and the dependencies on design parameters such as electrode geometries and bias voltages to these electrodes are shown. An electron beam of diameter 5 mm with energy of 5 keV was assumed for the simulation process. Some design parameters were identified as variable parameters in the presence of space charge. These parameters are the inclination angle of emission electrode, the applied voltage to the focusing electrode, the gap width between the emission electrode and the focusing electrode and the diameter of the focusing electrode. The triode extraction system is designed and optimized by using CST software(for Particle Beam Simulations). The physical design of the extraction system is given in this paper. From the simulation results, it is concluded that the inclination angle of the emission electrode is optimized at 22.5°, the applied voltage to the focusing electrode was optimized and found to be V_foc=-600 V, the optimal separation distance(gap between emission electrode and focusing electrode) is 4 mm, and the optimal diameter of the emission electrode is 14 mm. Initial results for these efforts aimed at emittance improvement are also be given.
- electron gun ,
- electron beam trajectories ,
- beam emittance and beam diameter ,
- focusing voltage

References

[1]	N. Rykalin, A. Uglov, I. Zuev, A. Kokora, Laser and electron beam material processing handbook, Moscow:MIR Publishers;(1988)
[2]	S. Schiller, U. Heisig, S. Panzer, Electron beam technology, New York:Wiley; 1982
[3]	Proceedings of the 7-th International Conference on Electron Beam Technologies(EBT'2003) Varna, Bulgaria; 1e6 June(2003)
[4]	P. H. Ron, Bulletin of Indian Vacuum Society, 1(2):3(1998)
[5]	R. J. Bakish, Metals, 38:53(1986)
[6]	A. S. Gilmour, Jr., Principles of Traveling Wave Tubes,(Artech House, Inc., Norwood, 1941)
[7]	Alexander Wu Chao, Herbert Moser, Principle of Physics Charge Particle Acceleration, Part IX,(1996)
[8]	M. Sedlacek, Electron Physics of Vacuum and Gaseous Devices,(Wiley, New York, 1996)
[9]	C. J. Karzmark, Medical Electron Accelerators, Department of Radiation Oncology Stanford University School of Medicine(McGraw-Hill, New York, 1993)
[10]	CST PS manual,(2011)
[11]	A. Spetier, Focusing of charged particles, New York and London:Academic press,(1967)
[12]	P. Spadtke, The physics and technology of ion sources, New York:John Wiley,(2004)

[1]	Yong-Chun Feng , Rui-Shi Mao , Peng Li , Xin-Cai Kang , Yan Yin , Tong Liu , Yao-Yao You , Yu-Cong Chen , Tie-Cheng Zhao , Zhi-Guo Xu , Yan-Yu Wang , You-Jin Yuan . Beam distribution reconstruction simulation for electron beam probe. Chinese Physics C, 2017, 41(7): 077001. doi: 10.1088/1674-1137/41/7/077001
[2]	Xiao-Guo Jiang , Yuan Wang , Zhi-Yong Yang , Huang Zhang , Yi Wang . Time-resolved measurement technique for pulsed electron beam envelope basing on framing and streaking principle. Chinese Physics C, 2016, 40(1): 017003. doi: 10.1088/1674-1137/40/1/017003
[3]	Zhi-Ying Li , Zhi-Yong Zhang , Yi-Feng Wei , Chi Wang , Yun-Long Zhang , Si-Cheng Wen , Xiao-Lian Wang , Zi-Zong Xu , Guang-Shun Huang . Energy correction for the BGO calorimeter of DAMPE using an electron beam. Chinese Physics C, 2016, 40(8): 086202. doi: 10.1088/1674-1137/40/8/086202
[4]	Abdurrahim , A. D. Ghodke . Effect of undulators on the stored electron beam of Indus-2. Chinese Physics C, 2015, 39(7): 077002. doi: 10.1088/1674-1137/39/7/077002
[5]	TANG Mei-Tang , YANG Xiao-Dong , MAO Li-Jun , LI Jie , MA Xiao-Ming , YAN Tai-Lai , ZHENG Wen-Heng , ZHAO He , WU Bo , WANG Geng , RUAN Shuang , SHA Xiao-Ping . Side-effects of the space charge field introduced by a hollow electron beam in the electron cooler of CSRm. Chinese Physics C, 2015, 39(12): 127003. doi: 10.1088/1674-1137/39/12/127003
[6]	JIA Qi-Ka . Analytical formula of free electron laser exponential gain for a non-resonant electron beam. Chinese Physics C, 2015, 39(4): 048101. doi: 10.1088/1674-1137/39/4/048101
[7]	ZHOU Zu-Sheng , HE Da-Yong , CHI Yun-Long . Electron gun system for NSC KIPT linac. Chinese Physics C, 2014, 38(6): 067006. doi: 10.1088/1674-1137/38/6/067006
[8]	HUANG Jiang , XIONG Yong-Qian , CHEN De-Zhi , LIU Kai-Feng , YANG Jun , LI Dong , YU Tiao-Qin , FAN Ming-Wu , YANG Bo . A permanent magnet electron beam spread system used fora low energy electron irradiation accelerator. Chinese Physics C, 2014, 38(10): 107008. doi: 10.1088/1674-1137/38/10/107008
[9]	JIANG Xiao-Guo , WANG Yuan , ZHANG Kai-Zhi , YANG Guo-Jun , SHI Jin-Shui , DENG Jian-Jun , LI Jin . Instantaneous electron beam emittance measurement system based on the optical transition radiation principle. Chinese Physics C, 2014, 38(1): 017002. doi: 10.1088/1674-1137/38/1/017002
[10]	WU Dai , YANG Ren-Jun , BAI Wei , LI Peng , LI Ming , YANG Xing-Fan . Design study of an improved laser wire system for electron beam measurement. Chinese Physics C, 2013, 37(10): 108101. doi: 10.1088/1674-1137/37/10/108101
[11]	MENG Ling-Jie , MA Xin-Wen , YANG Xiao-Dong , LI Jie , MAO Li-Jun , MA Xiao-Ming , YAN Tai-Lai , XIA Jia-Wen , YUAN You-Jin , XU Hu-Shan , YANG Jian-Cheng , XIAO Guo-Qing . Research of the detuning system of cooling electron beam for dielectronic recombination experiment at CSRm. Chinese Physics C, 2013, 37(1): 017004. doi: 10.1088/1674-1137/37/1/017004
[12]	WANG Wen-Jing , HUANG Sen-Lin , QUAN Sheng-Wen , LIN Lin , LIU Ke-Xin . An emittance measurement device for a space-charge dominated electron beam. Chinese Physics C, 2012, 36(9): 867-870. doi: 10.1088/1674-1137/36/9/013
[13]	B. A. Soliman , M. M. Abdelrahman , A. G. Helal , F. W. Abdelsalam . Simulation of ion beam extraction and focusing system. Chinese Physics C, 2011, 35(1): 83-87. doi: 10.1088/1674-1137/35/1/017
[14]	GAO Jie . Analytical treatment of the nonlinear electron cloud effect and the combined effects with beam-beam and space charge nonlinear forces in storage rings. Chinese Physics C, 2009, 33(2): 135-144. doi: 10.1088/1674-1137/33/2/012
[15]	ZHANG Kai-Zhi , ZHANG Huang , LONG Ji-Dong , YANG Guo-Jun , HE Xiao-Zhong , WANG Hua-Cen . Axial electric wake field inside the induction gap exited by the intense electron beam. Chinese Physics C, 2008, 32(10): 842-845. doi: 10.1088/1674-1137/32/10/015
[16]	WANG Tie-Shan , PENG Hai-Bo , Ovsyannikov V , Kentsch U , Ullmann F , CHENG Rui , Zschornack G . Production of highly charged argon ions from a room temperature electron beam ion trap. Chinese Physics C, 2008, 32(5): 389-392. doi: 10.1088/1674-1137/32/5/013
[17]	LI Quan-Feng , GUO Bing-Qi , ZHANG Jie-Xi , CHEN Huai-Bi . Study on the radiation problem caused by electron beam loss in accelerator tubes. Chinese Physics C, 2008, 32(7): 580-583. doi: 10.1088/1674-1137/32/7/014
[18]	Rao Yinong , Xia Jiawen , Yuan Youjin , Wei Baowen . Electron Beam Transverse Temperature in HIRFL-CSR Electron Cooler. Chinese Physics C, 1996, 20(S2): 205-212.
[19]	Liu Nianzong , Zhang Caidi , Zheng Linsheng , Hu Lidong , Zhao Xiaojian , Zhong Xuechu , Deng Hu , Zhu Shangen , Zhang Ge , Zhang Zhuxiang , Zhang Liangsheng , Zhou Yongshen , Xu Jianguo , Tan Yiping , Han Shurong , Han Ying , Bao Xiumin . Test Beam on the Beijing Electron Positron Collider (BEPC) and Physics Work on It. Chinese Physics C, 1992, 16(S4): 355-366.
[20]	Xie Jialin , Gao Jie , Huang Yonzhang , Zhang Renshan , Wang Youzhi . Thermionic Cathode Microwave Electron Gun. Chinese Physics C, 1990, 14(S4): 339-348.

Access

Get Citation

Nijatie A. Numerical simulation and design of a thermionic electron gun[J]. Chinese Physics C, 2016, 40(5): 057003. doi: 10.1088/1674-1137/40/5/057003

Nijatie A. Numerical simulation and design of a thermionic electron gun[J]. Chinese Physics C, 2016, 40(5): 057003. doi: 10.1088/1674-1137/40/5/057003 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2015-09-21

Article Metric

Article Views(1870)
PDF Downloads(136)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Numerical simulation and design of a thermionic electron gun

1. Plasma Physics and Nuclear Fusion Research School, Nuclear Science and Technology Research Institute, AEOI, PO Box 14155-1339, Tehran, Iran

Received Date: 2015-09-21

Available Online: 2016-05-05

Abstract: This paper reports the simulation of an electron gun. The effects on the beam quality of some parameters on the beam quality were studied and optimal choices were identified. It gives numerical beam qualities for a common electrostatic triode gun, and the dependencies on design parameters such as electrode geometries and bias voltages to these electrodes are shown. An electron beam of diameter 5 mm with energy of 5 keV was assumed for the simulation process. Some design parameters were identified as variable parameters in the presence of space charge. These parameters are the inclination angle of emission electrode, the applied voltage to the focusing electrode, the gap width between the emission electrode and the focusing electrode and the diameter of the focusing electrode. The triode extraction system is designed and optimized by using CST software(for Particle Beam Simulations). The physical design of the extraction system is given in this paper. From the simulation results, it is concluded that the inclination angle of the emission electrode is optimized at 22.5°, the applied voltage to the focusing electrode was optimized and found to be V_foc=-600 V, the optimal separation distance(gap between emission electrode and focusing electrode) is 4 mm, and the optimal diameter of the emission electrode is 14 mm. Initial results for these efforts aimed at emittance improvement are also be given.

HTML

Reference (12)

Numerical simulation and design of a thermionic electron gun

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article

Numerical simulation and design of a thermionic electron gun

HTML

目录