Effects of laser pulse heating of copper photocathodes on high-brightness electron beam production at blowout regime

Lian-Min Zheng; Ying-Chao Du; Chuan-Xiang Tang; Wei Gai

doi:10.1088/1674-1137/41/6/067002

Chinese Physics C> 2017, Vol. 41> Issue(6) : 067002 DOI: 10.1088/1674-1137/41/6/067002

Effects of laser pulse heating of copper photocathodes on high-brightness electron beam production at blowout regime

Lian-Min Zheng ^1,2,3 ,
Ying-Chao Du ^1,2 ,
Chuan-Xiang Tang ^1,2,, ,
Wei Gai ^1,2,3

1.
Accelerator Laboratory, Department of Engineering Physics, Tsinghua University, Beijing 100084, China
2.
Key Laboratory of Particle &
3.
High Energy Physics Division, Argonne National Laboratory, Lemont, Illinois 60439, USA

Abstract
HTML
Reference
Related

PDF

Abstract：
Producing high-brightness and high-charge (>100 pC) electron bunches at blowout regime requires ultrashort laser pulses with high fluence. The effects of laser pulse heating of the copper photocathode are analyzed in this paper. The electron and lattice temperature is calculated using an improved two-temperature model, and an extended Dowell-Schmerge model is employed to calculate the thermal emittance and quantum efficiency. A time-dependent growth of the thermal emittance and the quantum efficiency is observed. For a fixed amount of charge, the projected thermal emittance increases with decreasing laser radius, and this effect should be taken into account in laser optimization at blowout regime. Moreover, laser damage threshold fluence is simulated, showing that the maximum local fluence should be less than 40 mJ/cm² to prevent damage to the cathode.
- laser pulse heating ,
- photocathode ,
- two-temperature model ,
- blowout regime ,
- thermal emittance ,
- quantum efficiency

References

[1]	R. K. Li and P. Musumeci, Phys. Rev. Applied, 2(2): 024003 (2014)
[2]	P. Emma, R. Akre, J. Arthur et al, Nat. Photonics, 4(9): 641-647 (2010)
[3]	Y. Du, L. Yan, J. Hua et al, Rev. Sci. Instrum., 84(5): 053301 (2013)
[4]	C. Limborg-Deprey and P. R. Bolton, Nucl. Instrum. Methods Phys. Res., Sect. A, 557: 106 (2006)
[5]	Y. Li and J. W. Lewellen, Phys. Rev. Lett., 100: 074801 (2008)
[6]	O. J. Luiten, S. B. van der Geer, M. J. de Loos et al, Phys. Rev. Lett., 93(9): 094802 (2004)
[7]	P. Musumeci, J. T. Moody, R. J. England et al, Phys. Rev. Lett., 100(24): 244801 (2008)
[8]	P. Piot, Y.-E Sun, T. J. Maxwell et al, Phys. Rev. ST AB, 16(1): 010102 (2013)
[9]	Y. Li, arXiv:0809.1582
[10]	C. Limborg-Deprey, C. Adolphsen, D. McCormick et al, Phys. Rev. ST AB, 19(5): 053401 (2016)
[11]	J.B. Rosenzweig, A. Cahill, V. Dolgashev et al, arXiv:1603.01657
[12]	J. Maxson, P. Musumeci, L. Cultrera et al, arXiv:1606.05629v2
[13]	T. Q. Qiu and C. L. Tien, Int. J. Heat Mass Transfer, 35(3): 719-726 (1992)
[14]	L. Jiang and H. L. Tsai, J. Heat Transfer, 127(10): 1167-1173 (2005)
[15]	R. Fang, D. Zhang, H. Wei et al, Laser Part. Beams, 28(01): 157-164 (2010)
[16]	Z. Lin, L. V. Zhigilei, and V. Celli, Phys. Rev. B, 77(7): 075133 (2008)
[17]	J. Hohlfeld, S. S. Wellershoff, J. Gudde et al, Chem. Phys., 251(1): 237-258 (2000)
[18]	J. Byskov-Nielsen, J. M. Savolainen, M. S. Christensen et al, Appl. Phys. A, 103(2): 447-453 (2011)
[19]	J. B. Lee, K. G. Kang, and S. H. Lee, Mater. trans., 52(3): 547-553 (2011)
[20]	L. Spitzer, Physics of fully ionized gases, First edition (New York: Interscience Publishers, 1956), p. 78
[21]	L. Jiang and H. L. Tsai, Int. J. Heat Mass Transfer, 48(3): 487-499 (2005)
[22]	K. Eidmann, J. Meyer-ter-Vehn, T. Schlegel et al, Phys. Rev. E, 62(1): 1202 (2000)
[23]	https://www.mathworks.com/help/matlab/ref/pdepe.html, retrieved 13th November 2016
[24]	T. Vecchione, D. Dowell, W. Wan et al, Quantum Efficiency and Transverse Momentum from Metals, in Proceedings of FEL2013, (Geneva, Switzerland: JACoW, 2013), p. 424
[25]	J. Shao, H. Chen, Y. Du et al, Phys. Rev. ST AB, 17(7): 072002 (2014)

[1]	Xiang-Cui Lei , Yue-Kun Heng , Sen Qian , Jing-Kai Xia , Shu-Lin Liu , Zhi Wu , Bao-Jun Yan , Mei-Hang Xu , Zheng Wang , Xiao-Nan Li , Xiang-Dong Ruan , Xiao-Zhuang Wang , Yu-Zhen Yang , Wen-Wen Wang , Can Fang , Feng-Jiao Luo , Jing-Jing Liang , Lu-Ping Yang , Biao Yang . Evaluation of new large area PMT with high quantum efficiency. Chinese Physics C, 2016, 40(2): 026002. doi: 10.1088/1674-1137/40/2/026002
[2]	LI Wei-Wei , HE Zhi-Gang , JIA Qi-Ka . Compact narrow-band THz radiation source based on photocathode rf gun. Chinese Physics C, 2014, 38(4): 047003. doi: 10.1088/1674-1137/38/4/047003
[3]	DENG Hai-Xiao , ZHANG Meng , GU Duan , LIU Bo , GU Qiang , WANG Dong . Simulation studies on laser pulse stability for Dalian coherent light source. Chinese Physics C, 2014, 38(2): 028101. doi: 10.1088/1674-1137/38/2/028101
[4]	ZHANG Jin-Zhao , TUO Xian-Guo . A Monte Carlo simulation and setup optimization of output efficiency to PGNAA thermal neutron using ²⁵²Cf neutrons. Chinese Physics C, 2014, 38(7): 078201. doi: 10.1088/1674-1137/38/7/078201
[5]	TIAN Yang , YANG Yi-Gang , PAN Jing-Sheng , LI Yu-Lan , LI Yuan-Jing . High efficiency event-counting thermal neutron imagingusing a Gd-doped micro-channel plate. Chinese Physics C, 2014, 38(8): 086003. doi: 10.1088/1674-1137/38/8/086003
[6]	LI Wei-Wei , HE Zhi-Gang , JIA Qi-Ka . Generation and measurement of sub-picosecond electron bunch in photocathode rf gun. Chinese Physics C, 2013, 37(12): 127002. doi: 10.1088/1674-1137/37/12/127002
[7]	XU Ming , TANG Zhi-Cheng , CHEN Guo-Ming , TAO Jun-Quan . Comparison of thermal neutron detection efficiency of ⁶Li scintillation glass and ³He gas proportional tube. Chinese Physics C, 2013, 37(10): 106001. doi: 10.1088/1674-1137/37/10/106001
[8]	TIAN Yang , YANG Yi-Gang , LI Yu-Lan , LI Yuan-Jing . A numerical model of a coated capillary-plate thermal neutron collimator. Chinese Physics C, 2012, 36(5): 438-442. doi: 10.1088/1674-1137/36/5/010
[9]	DAI Jin , QUAN Sheng-Wen , CHANG Cheng , LIU Ke-Xin , ZHAO Kui . Cs₂Te photocathode fabrication system at Peking University. Chinese Physics C, 2012, 36(5): 475-478. doi: 10.1088/1674-1137/36/5/017
[10]	LI Xu-Dong , GU Qiang , ZHANG Meng , ZHAO Ming-Hua . The QE numerical simulation of PEAsemiconductor photocathode. Chinese Physics C, 2012, 36(6): 531-537 . doi: 10.1088/1674-1137/36/6/009
[11]	ZHANG He , WANG Fang , ZHANG Bao-Cheng , LIN Lin , HAO Jian-Kui , LIU Ke-Xin . Design of a low level radio frequency control system for the direct current-superconductive photocathode injector at Peking University. Chinese Physics C, 2011, 35(10): 955-958. doi: 10.1088/1674-1137/35/10/013
[12]	WANG Er-Dong , rg Kewisch , Ilan Ben-Zvi , Andrew Burrill , Trivini Rao , WU Qiong , Animesh Jain , Ramesh Gupta , Doug Holmes , ZHAO Kui . Heat load of a GaAs photocathode in an SRF electron gun. Chinese Physics C, 2011, 35(4): 387-391. doi: 10.1088/1674-1137/35/4/012
[13]	ZHU Xiong-Wei . Study on the W-band photocathode RF gun. Chinese Physics C, 2011, 35(12): 1159-1161. doi: 10.1088/1674-1137/35/12/015
[14]	LIU Hong-Bang , ZHENG Yang-Heng , XIE Yi-Gang , LV Jun-Guang , ZHOU Li , YU Bo-Xiang , ZHANG Ai-Wu , AN Zheng-Hua , XIE Yu-Guang , ZHANG Dong , ZHENG Zhi-Peng . Study of the THGEM detector with a reflective CsI photocathode. Chinese Physics C, 2011, 35(4): 363-367. doi: 10.1088/1674-1137/35/4/008
[15]	ZHU Xiong-Wei , WANG Shu-Hong , CHEN Sen-Yu . Design study of a L-band photocathode RF injector. Chinese Physics C, 2010, 34(2): 210-213. doi: 10.1088/1674-1137/34/2/010
[16]	LIU Sheng-Guang , Masafumi Fukuda , Sakae Araki , Nobuhiro Terunuma , Junji Urakawa . Emittance measurement & optimization for the photocathode RF gun with laser profile shaping. Chinese Physics C, 2010, 34(5): 584-588. doi: 10.1088/1674-1137/34/5/014
[17]	ZHU Xiong-Wei , WANG Shu-Hong , CHEN Sen-Yu . Design study of a L-band DC photocathode gun. Chinese Physics C, 2009, 33(4): 311-314. doi: 10.1088/1674-1137/33/4/015
[18]	GAO Jie . On the theory of photocathode rf guns. Chinese Physics C, 2009, 33(4): 306-310. doi: 10.1088/1674-1137/33/4/014
[19]	TANG Chuan-Xiang , LIU Xiao-Han . Ultra-low emittance X-band photocathode RF gun. Chinese Physics C, 2009, 33(S2): 102-104. doi: 10.1088/1674-1137/33/S2/026
[20]	Sun Changpu . Classical Model for Quantum Berry's Phase Factors. Chinese Physics C, 1989, 13(S1): 15-22.

Access

Get Citation

Lian-Min Zheng, Ying-Chao Du, Chuan-Xiang Tang and Wei Gai. Effects of laser pulse heating of copper photocathodes on high-brightness electron beam production at blowout regime[J]. Chinese Physics C, 2017, 41(6): 067002. doi: 10.1088/1674-1137/41/6/067002

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2016-11-17
Revised: 2017-01-06

Fund

Supported by National Natural Science Foundation of China (11375097)}

Article Metric

Article Views(1492)
PDF Downloads(22)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Effects of laser pulse heating of copper photocathodes on high-brightness electron beam production at blowout regime

Corresponding author: Chuan-Xiang Tang,

1. Accelerator Laboratory, Department of Engineering Physics, Tsinghua University, Beijing 100084, China

2. Key Laboratory of Particle &

3. High Energy Physics Division, Argonne National Laboratory, Lemont, Illinois 60439, USA

Received Date: 2016-11-17

Accepted Date: 2017-01-06

Available Online: 2017-06-05

Fund Project: Supported by National Natural Science Foundation of China (11375097)}

Abstract: Producing high-brightness and high-charge (>100 pC) electron bunches at blowout regime requires ultrashort laser pulses with high fluence. The effects of laser pulse heating of the copper photocathode are analyzed in this paper. The electron and lattice temperature is calculated using an improved two-temperature model, and an extended Dowell-Schmerge model is employed to calculate the thermal emittance and quantum efficiency. A time-dependent growth of the thermal emittance and the quantum efficiency is observed. For a fixed amount of charge, the projected thermal emittance increases with decreasing laser radius, and this effect should be taken into account in laser optimization at blowout regime. Moreover, laser damage threshold fluence is simulated, showing that the maximum local fluence should be less than 40 mJ/cm² to prevent damage to the cathode.

HTML

Reference (25)

Effects of laser pulse heating of copper photocathodes on high-brightness electron beam production at blowout regime

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article