Design of Injection Painting Bumper Magnets Pulse Power Supply for CSNS/RCS

SHEN Li; CHI Yun-Long; HUANG Chuan; TANG Jing-Yu

Chinese Physics C> 2008, Vol. 32> Issue(S1) : 22-24

Design of Injection Painting Bumper Magnets Pulse Power Supply for CSNS/RCS

Abstract
HTML
Reference
Related

PDF

Abstract：
The China Spallation Neutron Source (CSNS) Rapid Cycling Synchrotron (RCS) is a high beam power proton accelerator. The task of RCS injection system is to inject the negative hydrogen ions coming from linac into RCS by stripping method. This power supply demands that its output pulse current falling edge be controlled by the program. The power supply uses the IGBT power amplifying method to generate the pulse current and makes it follow the setting waveform by the power supply's feedback control system. The tracking error is one of the important specifications of the power supply. To satisfy the tracking error less than 2%, the frequency of the IGBT topology requested is more than 400kHz. The IGBT topology is connected by the IGBT H bridges in series and parallel, and works in the phase shifted method to divide the current, the voltage and improve the equivalent frequency. High power, high frequency, fast speed response and optimal feedback control strategy are the key to the good performance of painting bumper magnets pulsed power supply.

References

[1]

. IHEP, China Spallation Neutron Source (CSNS) Concept Design, July 2004(in Chinese)(中国科学院高能物理研究所, 中国散裂中子源工程(CSNC)概念设计报告, 2004年7月)2. TANG J Y. CHEN Y. CHI Y L et al. Injection System Design for the CSNS/RCS, EPAC20063. Dewan S. (DPS), Eng W. (BNL), Holmes R. (IE) et al.1.12 MVA Peak Two Quadrant Pulse Switch Mode PowerSupply for SNS Injection Bump Magnet, EPAC20024. Dewan S. (DPS), Eng W. (BNL) et al. 1400A, +/- 900VPeak Pulse Switch Mode Power Supplies for SNS InjectionKickers, EPAC20035. Yoshiro Irie (JAERI/KEK). Some Aspects of the J-PARC3-GeV Rapid Cycling Synchrotron, October 13, 20066. Takayana T. Kamiya J.Watanabe Met al. Design of the In-jection Bump System of the 3-GEV RCS in J-PARC, IEEE20067. Peng Sheng. SNS Power Supply and Magnet Control Sys-tem, 20068. YU C B et al. Automatic Control Principle, January 2006(in Chinese)(余成波等. 自动控制原理, 2006年1月出版)

[1]	YUAN Yao-Shuo , WANG Na , XU Shou-Yan , YUAN Yue , WANG Sheng . Theoretical study of a dual harmonic system and its application to the CSNS/RCS. Chinese Physics C, 2015, 39(12): 127002. doi: 10.1088/1674-1137/39/12/127002
[2]	YUAN Yao-Shuo , LI Kai-Wei , WANG Na , Yoshiro Irie , WANG Sheng . Study of the beam loading effect in the CSNS/RCS. Chinese Physics C, 2015, 39(4): 047003. doi: 10.1088/1674-1137/39/4/047003
[3]	LI Xiao , SUN Hong , LONG Wei , ZHAO Fa-Cheng , ZHANG Chun-Lin . Design and performance of the LLRF system for CSNS/RCS. Chinese Physics C, 2015, 39(2): 027002. doi: 10.1088/1674-1137/39/2/027002
[4]	LIU Ren-Hong , QU Hua-Min , ZHANG Jun-Song , KANG Ling , WANG Mo-Tuo , WANG Guang-Yuan , WANG Hai-Jing . Study of the dynamic characteristics of the AC dipole-girder system for CSNS/RCS. Chinese Physics C, 2014, 38(7): 077003. doi: 10.1088/1674-1137/38/7/077003
[5]	LIU Ren-Hong , ZHANG Jun-Song , QU Hua-Min , KANG Ling , WANG Mo-Tuo , WANG Guang-Yuan , WANG Hai-Jing . Vibration research of the AC dipole-girder system for CSNS/RCS. Chinese Physics C, 2014, 38(6): 067005. doi: 10.1088/1674-1137/38/6/067005
[6]	HUANG Ming-Yang , WANG Sheng , QIU Jing , WANG Na , XU Shou-Yan . Effects of injection beam parameters and foil scattering for CSNS/RCS. Chinese Physics C, 2013, 37(6): 067001. doi: 10.1088/1674-1137/37/6/067001
[7]	AN Yu-Wen , WANG Sheng . Study on application of independent component analysis in the CSNS/RCS. Chinese Physics C, 2013, 37(3): 037006. doi: 10.1088/1674-1137/37/3/037006
[8]	YANG Xiao-Yu , XU Tao-Guang , FU Shi-Nian , ZENG Lei , BIAN Xiao-Juan . Classical and modern power spectrum estimation for tune measurement in CSNS RCS. Chinese Physics C, 2013, 37(11): 117003. doi: 10.1088/1674-1137/37/11/117003
[9]	ZOU Yi-Qing , WANG Na , KANG Ling , QU Hua-Min , HE Zhe-Xi , YU Jie-Bing . Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS. Chinese Physics C, 2013, 37(5): 057004. doi: 10.1088/1674-1137/37/5/057004
[10]	LIU Ren-Hong , QU Hua-Min , KANG Ling , ZHANG Jun-Song , WANG Hai-Jing . Modal analysis of AC quadrupole magnet system for CSNS/RCS. Chinese Physics C, 2013, 37(8): 087002. doi: 10.1088/1674-1137/37/8/087002
[11]	YANG Xiao-Yu , XU Tao-Guang , FU Shi-Nian , LIU Yu-Dong , LI Yong , ZHAO Ya-Liang . Design of a stripline kicker for tune measurementin CSNS RCS. Chinese Physics C, 2012, 36(7): 666-669. doi: 10.1088/1674-1137/36/7/017
[12]	XU Shou-Yan , WANG Sheng . Study on space charge effects of the CSNS/RCS. Chinese Physics C, 2011, 35(12): 1152-1158. doi: 10.1088/1674-1137/35/12/014
[13]	WEI Tao , WANG Sheng , QIU Jing , TANG Jing-Yu , QIN Qing . Beam-loss driven injection optimization for CSNS/RCS. Chinese Physics C, 2010, 34(2): 218-223. doi: 10.1088/1674-1137/34/2/012
[14]	WEI Tao , WU Qing-Biao , LI Wen-Qian . Beam collimation for CSNS/RCS. Chinese Physics C, 2010, 34(4): 506-511. doi: 10.1088/1674-1137/34/4/018
[15]	LIU Lin , TANG Jing-Yu , QIU Jing , WEI Tao . Longitudinal RF capture and acceleration simulation in CSNS RCS. Chinese Physics C, 2009, 33(S2): 4-7. doi: 10.1088/1674-1137/33/S2/002
[16]	WEI Tao , FU Shi-Nian , QIN Qing , TANG Jing-Yu . RF trapping and acceleration in CSNS/RCS. Chinese Physics C, 2008, 32(6): 437-441. doi: 10.1088/1674-1137/32/6/005
[17]	CHI Yun-Long , WANG Wei . Design of Pulse Power Supply for CSNS Extraction Kicker Magnet. Chinese Physics C, 2008, 32(S1): 25-27.
[18]	QIU Jing , TANG Jing-Yu , WANG Sheng , WEI Jie . Studies of Transverse Phase Space Painting for the CSNS RCS Injection. Chinese Physics C, 2007, 31(10): 942-946.
[19]	TANG Jing-Yu , QIU Jing , WANG Sheng , WEI Jie . Physics Design and Study of the BSNS RCS Injection System. Chinese Physics C, 2006, 30(12): 1184-1189.
[20]	FAN KuanJun , WANG XiangQi , PEI YuanJi . Study of HLS Injection System with DC Assistant Bump. Chinese Physics C, 2000, 24(7): 676-680.

Access

Get Citation

SHEN Li, CHI Yun-Long, HUANG Chuan and TANG Jing-Yu. Design of Injection Painting Bumper Magnets Pulse Power Supply for CSNS/RCS[J]. Chinese Physics C, 2008, 32(S1): 22-24.

SHEN Li, CHI Yun-Long, HUANG Chuan and TANG Jing-Yu. Design of Injection Painting Bumper Magnets Pulse Power Supply for CSNS/RCS[J]. Chinese Physics C, 2008, 32(S1): 22-24. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2008-01-09
Revised: 1900-01-01

Article Metric

Article Views(1965)
PDF Downloads(759)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Design of Injection Painting Bumper Magnets Pulse Power Supply for CSNS/RCS

Corresponding author: SHEN Li,

Received Date: 2008-01-09

Accepted Date: 1900-01-01

Available Online: 2008-01-04

Abstract: The China Spallation Neutron Source (CSNS) Rapid Cycling Synchrotron (RCS) is a high beam power proton accelerator. The task of RCS injection system is to inject the negative hydrogen ions coming from linac into RCS by stripping method. This power supply demands that its output pulse current falling edge be controlled by the program. The power supply uses the IGBT power amplifying method to generate the pulse current and makes it follow the setting waveform by the power supply's feedback control system. The tracking error is one of the important specifications of the power supply. To satisfy the tracking error less than 2%, the frequency of the IGBT topology requested is more than 400kHz. The IGBT topology is connected by the IGBT H bridges in series and parallel, and works in the phase shifted method to divide the current, the voltage and improve the equivalent frequency. High power, high frequency, fast speed response and optimal feedback control strategy are the key to the good performance of painting bumper magnets pulsed power supply.

HTML

Reference (1)

Design of Injection Painting Bumper Magnets Pulse Power Supply for CSNS/RCS

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article