Beam hardening correction for a cone-beam CT system and its effect on spatial resolution

ZHAO Wei; FU Guo-Tao; SUN Cui-Li; WANG Yan-Fang; WEI Cun-Feng; CAO Da-Quan; QUE Jie-Min; TANG Xiao; SHI Rong-Jian; WEI Long; YU Zhong-Qiang

doi:10.1088/1674-1137/35/10/018

Chinese Physics C> 2011, Vol. 35> Issue(10) : 978-985 DOI: 10.1088/1674-1137/35/10/018

Beam hardening correction for a cone-beam CT system and its effect on spatial resolution

Abstract
HTML
Reference
Related

PDF

Abstract：
In this paper, we present a beam hardening correction (BHC) method in three-dimension space for a cone-beam computed tomography (CBCT) system in a mono-material case and investigate its effect on the spatial resolution. Due to the polychromatic character of the X-ray spectrum used, cupping and streak artifacts called beam hardening artifacts arise in the reconstructed CT images, causing reduced image quality. In addition, enhanced edges are introduced in the reconstructed CT images because of the beam hardening effect. The spatial resolution of the CBCT system is calculated from the edge response function (ERF) on different planes in space. Thus, in the CT images with beam hardening artifacts, enhanced ERFs will be extracted to calculate the modulation transfer function (MTF), obtaining a better spatial resolution that deviates from the real value. Reasonable spatial resolution can be obtained after reducing the artifacts. The 10% MTF value and the full width at half maximum (FWHM) of the point spread function with and without BHC are presented.

References

[1]

Hsieh J. Computed Tomography: Principles, Design, Artifacts, and Recent Advances. SPIE Press, 2003. 221-2302 Hammersberg P, Mangrad M. Journal of X-ray Science and Technology, 1998, 8: 75-933 Kak A C, Slaney M. Principles of Computerized Tomographic Imaging. IEEE Press, 1988. 120-1254 Kijewski P K, Bjarngard B E. Med. Phys., 1978, 5: 209-2145 Krumm M, Kasperl S, Franz M. NDTE International, 2008, 41: 242-2516 E1695-95. Tech. Rep., American Society for Testing and Material (ASTM), 19957 Casteele E V, Dyck D V, Sijbers J et al. Proceedings of SPIE, 2004, 5370: 20898 Otsu N. IEEE Transactions on SMC, 1979, 9(1): 62-669 WANG Y F et al. This work is preparing10 Canny J. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1986, PAMI-8(6): 679-69811 CHEN Zi-Kuan, NING Ruo-La. Phys. Med. Biol., 2004, 49(10): 1865-1880

[1]	Zhi-Ying Li , Zhi-Yong Zhang , Yi-Feng Wei , Chi Wang , Yun-Long Zhang , Si-Cheng Wen , Xiao-Lian Wang , Zi-Zong Xu , Guang-Shun Huang . Energy correction for the BGO calorimeter of DAMPE using an electron beam. Chinese Physics C, 2016, 40(8): 086202. doi: 10.1088/1674-1137/40/8/086202
[2]	Jian-Yong Zhang , Xiao Cai , Xiao-Hu Mo , Di-Zhou Guo , Jian-Li Wang , Bai-Qi Liu , M. N. Achasov , A. A. Krasnov , N. Yu. Muchnoi , E. E. Pyata , E. V. Mamoshkina , F. A. Harris . Upgrade of beam energy measurement system at BEPC-Ⅱ. Chinese Physics C, 2016, 40(7): 076001. doi: 10.1088/1674-1137/40/7/076001
[3]	Kui-Dong Huang , Zhe Xu , Ding-Hua Zhang , Hua Zhang , Wen-Long Shi . Robust scatter correction method for cone-beam CT using an interlacing-slit plate. Chinese Physics C, 2016, 40(6): 068202. doi: 10.1088/1674-1137/40/6/068202
[4]	Abdurrahim , A. D. Ghodke . Effect of undulators on the stored electron beam of Indus-2. Chinese Physics C, 2015, 39(7): 077002. doi: 10.1088/1674-1137/39/7/077002
[5]	YUAN Yao-Shuo , LI Kai-Wei , WANG Na , Yoshiro Irie , WANG Sheng . Study of the beam loading effect in the CSNS/RCS. Chinese Physics C, 2015, 39(4): 047003. doi: 10.1088/1674-1137/39/4/047003
[6]	ZHANG Hua , HUANG Kui-Dong , SHI Yi-Kai , XU Zhe . Point spread function modeling and image restoration for cone-beam CT. Chinese Physics C, 2015, 39(3): 038202. doi: 10.1088/1674-1137/39/3/038202
[7]	LIU Shu-Hui , WANG Zhi-Jun , ZHANG Cong , HE Yuan . Beam steering correction of the quarter wave resonator in the HISCL. Chinese Physics C, 2014, 38(10): 107007. doi: 10.1088/1674-1137/38/10/107007
[8]	YANG Min , WANG Xiao-Long , LIU Yi-Peng , MENG Fan-Yong , LI Xing-Dong , LIU Wen-Li , WEI Dong-Bo . Automatic calibration method of voxel size for cone-beam 3D-CT scanning system. Chinese Physics C, 2014, 38(4): 046202. doi: 10.1088/1674-1137/38/4/046202
[9]	BAI Jiao-Ni , ZENG Lei , WANG Biao , LI Peng , LI Fang , XU Tao-Guang , LI Zi-Gao . Modified read-out system of the beam phase measurement system for CSNS. Chinese Physics C, 2013, 37(10): 107004. doi: 10.1088/1674-1137/37/10/107004
[10]	WANG Yan-Fang , UE Jie-Min , CAO Da-Quan , SUN Cui-Li , ZHAO Wei , WEI Cun-Feng , SHI Rong-Jian , WEI Long . Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system. Chinese Physics C, 2013, 37(7): 078202. doi: 10.1088/1674-1137/37/7/078202
[11]	XIE Shi-Peng , LUO Li-Min . Scatter correction for cone-beam computedtomography using self-adaptive scatterkernel superposition. Chinese Physics C, 2012, 36(6): 566-572. doi: 10.1088/1674-1137/36/6/015
[12]	BAI Sha , GAO Jie . Simulation of beam size multiknobs correction at the Accelerator Test Facility 2 at KEK. Chinese Physics C, 2011, 35(4): 397-401. doi: 10.1088/1674-1137/35/4/014
[13]	B. A. Soliman , M. M. Abdelrahman , A. G. Helal , F. W. Abdelsalam . Simulation of ion beam extraction and focusing system. Chinese Physics C, 2011, 35(1): 83-87. doi: 10.1088/1674-1137/35/1/017
[14]	YANG Min , CHEN Hao , MENG Fan-Yong , WEI Dong-Bo . Novel correction method for X-ray beam energy fluctuation of high energy DR system with a linear detector. Chinese Physics C, 2011, 35(11): 1074-1078. doi: 10.1088/1674-1137/35/11/018
[15]	MO Xiao-Hu , CHU Yuan-Ping , DONG Hai-Yi , FU Cheng-Dong , LI Xiao-Nan , LIU Qian , QU Hua-Min , QIN Qing , SHEN Cheng-Ping , WANG Yi-Fang , XU Jin-Qiang , ZHANG Jian-Yong , ZHANG Qing-Jiang , ZHANG Yin-Hong , ZHANG Tian-Bao , ZHAO Zhuo . Beam energy measurement system at BEPCⅡ. Chinese Physics C, 2010, 34(6): 912-917. doi: 10.1088/1674-1137/34/6/050
[16]	RONG Jun-Yan , FU Guo-Tao , WEI Cun-Feng , SUN Cui-Li , WEI Long . Measurement of spatial resolution of the micro-CT system. Chinese Physics C, 2010, 34(3): 412-416. doi: 10.1088/1674-1137/34/3/022
[17]	YANG Min , JIN Xu-Ling , LI Bao-Lei . A new method to determine the projected coordinate origin of a cone-beam CT system using elliptical projection. Chinese Physics C, 2010, 34(10): 1665-1670. doi: 10.1088/1674-1137/34/10/022
[18]	ZHOU Ri-Feng , WANG Jue , CHEN Wei-Min . X-ray beam hardening correction for measuring density in linear acceleratorindustrial computed tomography. Chinese Physics C, 2009, 33(7): 599-602. doi: 10.1088/1674-1137/33/7/018
[19]	LI Liang , CHEN Zhi-Qiang , ZHANG Li , XING Yu-Xiang , KANG Ke-Jun . A New Cone-Beam X-Ray CT System with a Reduced Size Planar Detector. Chinese Physics C, 2006, 30(8): 812-817.
[20]	Huang Yongzhang , Wu Gang . Transient Beam Loading Effect in Constant Gradient Accelerator Structure. Chinese Physics C, 1994, 18(Z1): 113-120.

Access

Get Citation

ZHAO Wei, FU Guo-Tao, SUN Cui-Li, WANG Yan-Fang, WEI Cun-Feng, CAO Da-Quan, QUE Jie-Min, TANG Xiao, SHI Rong-Jian, WEI Long and YU Zhong-Qiang. Beam hardening correction for a cone-beam CT system and its effect on spatial resolution[J]. Chinese Physics C, 2011, 35(10): 978-985. doi: 10.1088/1674-1137/35/10/018

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2011-01-24
Revised: 2011-04-18

Article Metric

Article Views(2438)
PDF Downloads(498)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Beam hardening correction for a cone-beam CT system and its effect on spatial resolution

Received Date: 2011-01-24

Accepted Date: 2011-04-18

Available Online: 2011-10-05

Abstract: In this paper, we present a beam hardening correction (BHC) method in three-dimension space for a cone-beam computed tomography (CBCT) system in a mono-material case and investigate its effect on the spatial resolution. Due to the polychromatic character of the X-ray spectrum used, cupping and streak artifacts called beam hardening artifacts arise in the reconstructed CT images, causing reduced image quality. In addition, enhanced edges are introduced in the reconstructed CT images because of the beam hardening effect. The spatial resolution of the CBCT system is calculated from the edge response function (ERF) on different planes in space. Thus, in the CT images with beam hardening artifacts, enhanced ERFs will be extracted to calculate the modulation transfer function (MTF), obtaining a better spatial resolution that deviates from the real value. Reasonable spatial resolution can be obtained after reducing the artifacts. The 10% MTF value and the full width at half maximum (FWHM) of the point spread function with and without BHC are presented.

HTML

Reference (1)

Beam hardening correction for a cone-beam CT system and its effect on spatial resolution

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article

Beam hardening correction for a cone-beam CT system and its effect on spatial resolution

HTML

目录