The design simulation of the superconducting section in the ADS injector Ⅱ

WANG Zhi-Jun; HE Yuan; LIU Yong; YUE Wei-Ming; YANG Xiao-Liang; WU Wei; LI Chao; XIAO Chen; JIA Huan

doi:10.1088/1674-1137/36/3/012

Chinese Physics C> 2012, Vol. 36> Issue(3) : 256-260 DOI: 10.1088/1674-1137/36/3/012

The design simulation of the superconducting section in the ADS injector Ⅱ

Abstract
HTML
Reference
Related

PDF

Abstract：
The high-current superconducting proton linac is being studied for the accelerator-driven system (ADS) project undertaken by the Chinese Academy of Sciences. The injector Ⅱ will be operated at 162.5 MHz, and the proton out from the RFQ with an energy of 2.5 MeV will be accelerated to 10 MeV by two cryo-modules, which are composed of eight superconducting half wave resonance cavities and nine solenoids. In this paper, the design and beam simulation of the superconducting section of the injector Ⅱ, the acceptance calculation and a stability analysis are presented.

[1]	Ning Wang . Refinement of an analytical capture cross section formula. Chinese Physics C, 2025, 49(12): 124106. doi: 10.1088/1674-1137/adfe53
[2]	Zhen-Ming Xu , Bin Wu , Tao Yang , Wen-Li Yang . A new measure of thermal micro-behavior for the AdS black hole. Chinese Physics C, 2021, 45(1): 015106. doi: 10.1088/1674-1137/abc23e
[3]	YAN Jia-Qing , XIE Yu-Guang , HU Tao , LU Jun-Guang , ZHOU Li , QU Guo-Pu , CAI Xiao , NIU Shun-Li , CHEN Hai-Tao . Simulation and performance study of ceramic THGEM. Chinese Physics C, 2015, 39(6): 066001. doi: 10.1088/1674-1137/39/6/066001
[4]	ZHANG Zhou-Li , HE Yuan , ZHANG Bin , LI De-Run , SHI Ai-Min , PAN Gang , DU Xiao-Nan , SUN Lie-Peng . Study of influence of radial matcher section end shape on RFQ cavity frequency. Chinese Physics C, 2014, 38(7): 077007. doi: 10.1088/1674-1137/38/7/077007
[5]	ZHANG Cong , HE Yuan , ZHAO Hong-Wei , ZHANG Sheng-Hu . Multipacting simulation and analysis of a taper quarter wave cavity by using Analyst-PT3P. Chinese Physics C, 2012, 36(4): 362-366. doi: 10.1088/1674-1137/36/4/012
[6]	XU Ji-Lei , GUAN Meng-Yun , YANG Chang-Gen , WANG Yi-Fang , ZHANG Jia-Wen , LU Chang-Guo , Kirk McDonald , Robert Hackenburg , Kwong Lau , Logan Lebanowski , Cullen Newsom , Lin Shih-Kai , Jonathan Link , MA Lie-Hua , Viktor Pec , Vit Vorobel , CHEN Jin , LIU Jin-Chang , ZHOU Yong-Zhao , LIANG Hao . Design and preliminary test results of Daya Bay RPC modules. Chinese Physics C, 2011, 35(9): 844-850. doi: 10.1088/1674-1137/35/9/011
[7]	PENG Quan-Ling , SUN Jian , ZHAO Guang-Yuan , SHI Cai-Tu . Principle and Software Design of Helmhotz Coil Measurement System. Chinese Physics C, 2001, 25(9): 920-925.

Access

Get Citation

WANG Zhi-Jun, HE Yuan, LIU Yong, YUE Wei-Ming, YANG Xiao-Liang, WU Wei, LI Chao, XIAO Chen and JIA Huan. The design simulation of the superconducting section in the ADS injector Ⅱ[J]. Chinese Physics C, 2012, 36(3): 256-260. doi: 10.1088/1674-1137/36/3/012

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2011-03-14
Revised: 1900-01-01

Article Metric

Article Views(3655)
PDF Downloads(676)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

The design simulation of the superconducting section in the ADS injector Ⅱ

Corresponding author: WANG Zhi-Jun,

Corresponding author: HE Yuan,

Received Date: 2011-03-14
Accepted Date: 1900-01-01
Available Online: 2012-03-01

Abstract: The high-current superconducting proton linac is being studied for the accelerator-driven system (ADS) project undertaken by the Chinese Academy of Sciences. The injector Ⅱ will be operated at 162.5 MHz, and the proton out from the RFQ with an energy of 2.5 MeV will be accelerated to 10 MeV by two cryo-modules, which are composed of eight superconducting half wave resonance cavities and nine solenoids. In this paper, the design and beam simulation of the superconducting section of the injector Ⅱ, the acceptance calculation and a stability analysis are presented.