Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

PEI Shi-Lun; LI Xiao-Ping; XIAO Ou-Zheng

doi:10.1088/1674-1137/36/5/014

Chinese Physics C> 2012, Vol. 36> Issue(5) : 456-463 DOI: 10.1088/1674-1137/36/5/014

Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

Abstract
HTML
Reference
Related

PDF

Abstract：
An RF pulse compressor is a device used to convert a long RF pulse to a short one with a much higher peak RF magnitude. SLED can be regarded as the earliest RF pulse compressor to be used in large-scale linear accelerators. It has been widely studied around the world and applied in the BEPC and BEPCⅡ linac for many years. During routine operation, error and jitter effects will deteriorate the performance of SLED, either on the output electromagnetic wave amplitude or phase. The error effects mainly include the frequency drift induced by cooling water temperature variation and the frequency/Q₀/β unbalances between the two energy storage cavities caused by mechanical fabrication or microwave tuning. The jitter effects refer to the PSK switching phase and time jitters. In this paper, we re-derive the generalized formulae for the conventional SLED used in the BEPCⅡ linac, and the error and jitter effects on SLED performance are also investigated.

References

[1]

Nantista C D. Radio-Frequency Pulse Compression for Lin- ear Accelerators (Ph.D. Thesis). Los Angeles: University of California, 19952 GU Peng-Da. Studies on New RF Pulse Compressor (Ph.D. Thesis). Beijing: Institute of High Energy Physics, CAS,1999 (in Chinese)3 PEI Guo-Xi et al. Overview of BEPCⅡ Linac Upgrade. Preliminary Design Report of BEPCⅡ-Linac, IHEP- BEPCⅡ-SB-03, 2002.64 Wangler T P. Principles of RF Linear Accelerators. New York: John Wiley Sons, Inc., 19985 LI Guang-Lin et al. The BEPC RD Report, Part I, In- jector, 19896 ZHAO Feng-Li. Private Communication

[1]	Zheng-Feng Xiong , Cheng Cheng , Jian Yu , Huai-Bi Chen , Hui Ning . Switching speed effect of phase shift keying in SLED for generating high power microwaves. Chinese Physics C, 2016, 40(1): 017006. doi: 10.1088/1674-1137/40/1/017006
[2]	HUANG Liang-Sheng , Yoshiro Irie , LIU Yu-Dong , WANG Sheng . Mode error analysis of impedance measurement using twin wires. Chinese Physics C, 2015, 39(3): 037003. doi: 10.1088/1674-1137/39/3/037003
[3]	LI Lin , FANG Wen-Cheng , WANG Chao-Peng , GU Qiang . Modeling and analysis of SLED. Chinese Physics C, 2015, 39(4): 047002. doi: 10.1088/1674-1137/39/4/047002
[4]	MENG Cai , LI Zhi-Hui , TANG Jing-Yu . Error analysis and lattice improvement for the C-ADS Injector-Ⅰ. Chinese Physics C, 2014, 38(6): 067008. doi: 10.1088/1674-1137/38/6/067008
[5]	ZHOU Xiao-Lin , YUN Ming-Kai , CAO Xue-Xiang , LIU Shuang-Quan , WANG Lu , HUANG Xian-Chao , WEI Long . Evaluation of imaging protocol for ECT based on CS image reconstruction algorithm. Chinese Physics C, 2014, 38(4): 048201. doi: 10.1088/1674-1137/38/4/048201
[6]	KE Zun-Jian , LI Jia-Cai , ZHANG Shao-Ping , AN Guang-Peng , TANG Xing-Hua , YANG Tao . A plastic scintillating fiber position detector in vacuum for the test beam facility at BEPCⅡ-LINAC. Chinese Physics C, 2012, 36(1): 67-70. doi: 10.1088/1674-1137/36/1/011
[7]	SUI Yan-Feng , WANG Lin , ZHAO Ying , YUE Jun-Hui , LI Xiao-Ping , CAO Jian-She , MA Li . BEPCⅡ wire scanner system. Chinese Physics C, 2010, 34(10): 1661-1664. doi: 10.1088/1674-1137/34/10/021
[8]	ZHANG Chuang . BEPCⅡ: construction and commissioning. Chinese Physics C, 2009, 33(S2): 60-64. doi: 10.1088/1674-1137/33/S2/016
[9]	QIN Qing , HUANG Nan , LIU Wei-Bin , LIU Yu-Dong , PENG Yue-Mei , QIU Jing , WANG Dou , WANG Xin-Hao , WANG Na , WANG Jiu-Qing , WEI Yuan-Yuan , WEN Xue-Mei , XING Jun , XU Gang , YU Cheng-Hui , ZHANG Chuang , ZHANG Yuan , ZHAO Zheng , ZHOU De-Min . Beam dynamics studies on BEPC-Ⅱ storage rings at the commissioning stage. Chinese Physics C, 2009, 33(S2): 65-70. doi: 10.1088/1674-1137/33/S2/017
[10]	LIU Yu-Dong , YUE Jun-Hui , WANG Na . Studies on electron cloud instability in BEPCⅡ. Chinese Physics C, 2009, 33(S2): 71-74. doi: 10.1088/1674-1137/33/S2/018
[11]	SUI Yan-Feng , MA Hui-Zhou , CAO Jian-She , MA Li . Design and simulation of the wire scanner for the injector linac of BEPCⅡ. Chinese Physics C, 2008, 32(5): 397-399. doi: 10.1088/1674-1137/32/5/015
[12]	SUN Yi-Peng , GAO Jie . Some Studies on Increasing the Luminosity of BEPCⅡ. Chinese Physics C, 2007, 31(2): 189-193.
[13]	GUO Zhi-Yuan , LIU Yu-Dong , Qin Qing , WANG Jiu-Qing , XING Jun . The Studies of Electron Cloud Instability in the BEPC. Chinese Physics C, 2006, 30(S1): 102-104.
[14]	GEN Zhe-Qiao , HOU Mi , PEI Guo-Xi . PAD Design for the Phasing System of BEPCⅡ Linac. Chinese Physics C, 2006, 30(2): 151-154.
[15]	ZHAO Feng-Li , HOU Mi , ZHAO Yan-Ping , LIU Jin-Tong , ZHANG Jing-Ru , ZHOU Yao-Xiang , HAN Da-Wei . Microwave System for BEPCⅡ-Linac. Chinese Physics C, 2006, 30(2): 155-158.
[16]	LI Jia-Cai¹ , WU Yuan-Ming¹ , CUI Xiang-Zong¹ , ZHANG Liang-Sheng¹ , ZHOU Bao-Qing¹ , LIU Zheng-Quan¹ , ZHANG Shao-Ping¹ , LIU Shi-Xing² , SUN Chang-Chun¹ , SHEN Ji² , YIN Ze-Jie² , ZHANG Yong-Ming<sup , , , , . A Test Beam Upgrade Based on the BEPC-LINAC. Chinese Physics C, 2004, 28(12): 1269-1277.
[17]	GU Peng-Da , PEI Guo-Xi , WANG Shu-Hong . SLED System for Long Pulse Multi-bunch Linac. Chinese Physics C, 2001, 25(4): 348-353.
[18]	Yang Changgen , Chen Hesheng , Jin Bingnian , Tang Xiaowei , M. Pohi . Fitting Method and Error Study for Tau Lifetime Measurement of L3 Experiment. Chinese Physics C, 1994, 18(S3): 243-250.
[19]	The Electron LINAC Department . THE 250MeV SECTION OF BEPC 1.1/1.4GeV e^± LINAC. Chinese Physics C, 1988, 12(3): 365-371.
[20]	Electron Linac Laboratory . The 250 MeV Section of BEPC 1.1/1.4 GeV e^± Linac. Chinese Physics C, 1988, 12(S1): 19-26.

Access

Get Citation

PEI Shi-Lun, LI Xiao-Ping and XIAO Ou-Zheng. Error and jitter e ect studies on the SLED for the BEPCⅡ-linac[J]. Chinese Physics C, 2012, 36(5): 456-463. doi: 10.1088/1674-1137/36/5/014

PEI Shi-Lun, LI Xiao-Ping and XIAO Ou-Zheng. Error and jitter e ect studies on the SLED for the BEPCⅡ-linac[J]. Chinese Physics C, 2012, 36(5): 456-463. doi: 10.1088/1674-1137/36/5/014 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2011-08-11
Revised: 2011-08-30

Article Metric

Article Views(1473)
PDF Downloads(367)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

Received Date: 2011-08-11

Accepted Date: 2011-08-30

Available Online: 2012-05-05

Abstract: An RF pulse compressor is a device used to convert a long RF pulse to a short one with a much higher peak RF magnitude. SLED can be regarded as the earliest RF pulse compressor to be used in large-scale linear accelerators. It has been widely studied around the world and applied in the BEPC and BEPCⅡ linac for many years. During routine operation, error and jitter effects will deteriorate the performance of SLED, either on the output electromagnetic wave amplitude or phase. The error effects mainly include the frequency drift induced by cooling water temperature variation and the frequency/Q₀/β unbalances between the two energy storage cavities caused by mechanical fabrication or microwave tuning. The jitter effects refer to the PSK switching phase and time jitters. In this paper, we re-derive the generalized formulae for the conventional SLED used in the BEPCⅡ linac, and the error and jitter effects on SLED performance are also investigated.

HTML

Reference (1)

Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article

Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

HTML

目录