Design and cold test of a rectangular cavity beam position monitor

SU Jia-Hang; DU Ying-Chao; HUA Jian-Fei; ZHENG Shu-Xin; QIU Jia-Qi; YANG Jin; HUANG Wen-Hui; CHEN Huai-Bi; TANG Chuan-Xiang

doi:10.1088/1674-1137/37/1/017002

Chinese Physics C> 2013, Vol. 37> Issue(1) : 017002 DOI: 10.1088/1674-1137/37/1/017002

Design and cold test of a rectangular cavity beam position monitor

Abstract
HTML
Reference
Related

PDF

Abstract：
CBPM is a kind of monitor which is used for the measurement of beam transverse position. And it is more and more popular for its high potential in the resolution performance. In theory, the resolution can reach about 1 nanometer. In this paper, a rectangular CBPM is designed for it has better X-Y isolation than a cylinder one. It has been simulated and measured, and the results agree with each other very well. The procedures and results for the simulation and the cold test will be shown later and it will be proved that this is a reliable method for the CBPM design.

References

[1]

Slaton T et al. Development of Nanometer Resolution C-band Radio Frequency Beam Position Monitors in the Final Focus Test Beam. LINAC'98, Chicago. KEK Preprint, Aug. 1998. 98-145[2] Shintake T. Development of Nanometer Resolution RF-BPM. KEK Preprint, November 1998. 98-188[3] Balakin V et al. Experimental Results From a Microwave Cavity Beam Position Monitor. Proceedings of the 1999 Particle Accelerator Conference. New York. 1999[4] Johnson R et al. Cavity BPMs for the NLC. SLAC-PUB-9211, May 2002[5] LI Zeng-Hai et al. Cavity BPM with Dipole-mode-selective Coupler. Proceedings of the 2003 Particle Accelerator Conference. 2003[6] Walston S et al. Nuclear Instruments and Methods in Physics Research A, 2007, 578: 1-22[7] Walston S et al. Resolution of a High Performance Cavity Beam Position Monitor System. Proceedings PAC. 2007[8] CHU Jian-Hua. Development of a C-Band Cavity BPM and RF Electronics (Doctoral Thesis). Shanghai: Shanghai Institute of Applied Physics, 2008 (in Chinese)[9] LI Xiang. Design and Experiments for Cavity Beam Position Monitor (Master Thesis). Department of Engineering Physics, Tsinghua University, May, 2009[10] Yoichi Inoue et al. Physical Review Special Topics-Accelerators and Beams, 2008, 11: 062801[11] TANG Chuan-Xiang et al. Nuclear Instruments and Methods in Physics Research A, 2009, 608: S70-S74[12] Tomoya Nakamura. Development of Beam-position Monitors with High Position Resolution (Master Thesis). Department of Physics, Graduate School of Science, The University of Tokyo, Feb. 3, 2008[13] HE Xiao-Zhong. Theoratical and Initial Experimental Research on Low Emittance Photoinjector (Doctor Thesis). Department of Engineering Physics, Tsinghua University, June, 2006

[1]	XIE Hong-Ming , WU Jun-Xia , ZHANG Yong , ZHU Guang-Yu , XIA Jia-Wen , YE Min-You . Beam experiments with a non-intercepting beam induced fluorescence profile monitor for the ADS LINAC. Chinese Physics C, 2015, 39(11): 117004. doi: 10.1088/1674-1137/39/11/117004
[2]	ZHU Hong-Yan , DONG Lan , LI Bo . Design and simulation of a wire position monitor for cryogenicsystems in an ADS linac. Chinese Physics C, 2014, 38(8): 087001. doi: 10.1088/1674-1137/38/8/087001
[3]	ZOU Jun-Ying , WU Fang-Fang , YANG Yong-Liang , SUN Bao-Gen , ZHOU Ze-Ran , LUO Qing , LU Ping , XU Hong-Liang . A new measurement method for electrode gain in an orthogonally symmetric beam position monitor. Chinese Physics C, 2014, 38(12): 127002. doi: 10.1088/1674-1137/38/12/127002
[4]	YUAN Ren-Xian , ZHOU Wei-Min , CHEN Zhi-Chu , YU Lu-Yang , WANG Bao-Pen , LENG Yong-Bin . Design and test of SX-FEL cavity BPM. Chinese Physics C, 2013, 37(11): 118001. doi: 10.1088/1674-1137/37/11/118001
[5]	LIU Mei , DAI Hong-Liang , QI Hui-Rong , ZHUANG Bao-An , ZHANG Jian , LIU Rong-Guang , ZHU Qi-Ming , OUYANG Qun , CHEN Yuan-Bo , JIANG Xiao-Shan , WANG Ya-Jie , LIU Peng , CHANG Guang-Cai . Beam test of a one-dimensional position sensitive chamber on synchrotron radiation. Chinese Physics C, 2013, 37(10): 108001. doi: 10.1088/1674-1137/37/10/108001
[6]	SUN Yong-Jie , YANG Shuai , LI Cheng , QIAN Sen , XU Lai-Lin , FU Zai-Wei , HENG Yue-Kun , CHEN Hong-Fang , TANG Ze-Bo , SHAO Ming , LIU Huan-Huan . A prototype MRPC beam test for the BESⅢ ETOF upgrade. Chinese Physics C, 2012, 36(5): 429-433. doi: 10.1088/1674-1137/36/5/008
[7]	MI Zheng-Hui , SUN Yi , WANG Guang-Wei , PAN Wei-Min , LI Zhong-Quan , DAI Jian-Ping , MA Qiang , LIN Hai-Ying , LIU Ya-Ping , XU Bo , HUANG Hong , WANG Qun-Yao , XU Yu-Fen , ZHAO Guang-Yuan , HUANG Tong-Ming , SHA Peng , MENG Fan-Bo , QIU Feng , LI Han , CHEN Xu , ZHAO Dan-Yang , ZHANG Juan . Horizontal test for BEPCⅡ 500 MHz spare cavity. Chinese Physics C, 2012, 36(10): 996-999. doi: 10.1088/1674-1137/36/10/014
[8]	M. Y&#0 , maz . DTL cavity design and beam dynamics for a TAC linear proton accelerator. Chinese Physics C, 2012, 36(2): 167-172. doi: 10.1088/1674-1137/36/2/012
[9]	KE Zun-Jian , LI Jia-Cai , ZHANG Shao-Ping , AN Guang-Peng , TANG Xing-Hua , YANG Tao . A plastic scintillating fiber position detector in vacuum for the test beam facility at BEPCⅡ-LINAC. Chinese Physics C, 2012, 36(1): 67-70. doi: 10.1088/1674-1137/36/1/011
[10]	DAI Jing , LU Xiang-Yang , QUAN Sheng-Wen , ZHANG Bao-Cheng , LIN Lin , HAO Jian-Kui , ZHU Feng , XU Wen-Can , HE Fei-Si , JIN Song , WANG Fang , LIU Ke-Xin , ZHAO Kui . Cold RF test and associated mechanical features correlation of a TESLA-style 9-cell superconducting niobium cavity built in China. Chinese Physics C, 2012, 36(2): 156-159. doi: 10.1088/1674-1137/36/2/010
[11]	TIAN Jian-Min , XU Mei-Hang , ZHAO Zhong-Liang , CHEN Chang , RUAN Xiang-Dong , CHEN Yuan-Bo , XU Tao-Guang , LU Shuang-Tong . Improved design and construction of an ionization chamber for the CSNS beam loss monitor (BLM). Chinese Physics C, 2012, 36(4): 329-333. doi: 10.1088/1674-1137/36/4/006
[12]	ZHOU Jian-Rong , SUN Zhi-Jia , LIU Ben , WANG Yan-Feng , YANG Gui-An , ZHOU Liang , XU Hong , DONG Jing , YANG Lei , LI Yi . Neutron beam monitor based on a boron-coated GEM. Chinese Physics C, 2011, 35(7): 668-674. doi: 10.1088/1674-1137/35/7/012
[13]	LI Xiang , ZHENG Shu-Xin . Design and experiments for the waveguide to coaxial cable adapter of a cavity beam position monitor. Chinese Physics C, 2011, 35(1): 79-82. doi: 10.1088/1674-1137/35/1/016
[14]	LI Xiang , ZHENG Shu-Xin . Simulation and experiments for the Q_ext of a cavity beam position monitor. Chinese Physics C, 2010, 34(3): 405-408. doi: 10.1088/1674-1137/34/3/020
[15]	FENG Lang , GE Yu-Cheng , WANG He , FAN Feng-Ying , QIAO Rui , LU Fei , SONG Yu-Shou , ZHENG Tao , YE Yan-Lin . New test and analysis of position-sensitive-silicon-detector. Chinese Physics C, 2009, 33(1): 50-53. doi: 10.1088/1674-1137/33/1/011
[16]	XU Mei-Hang , TIAN Jian-Min , CHEN Chang , CHEN Yuan-Bo , XU Tao-Guang , LU Shuang-Tong . Design and construction of the first prototype ionization chamber for CSNS and PA beam loss monitor (BLM) system. Chinese Physics C, 2009, 33(2): 123-126. doi: 10.1088/1674-1137/33/2/010
[17]	RUAN Yu-Fang , XU Tao-Guang , FU Shi-Nian . Design and simulation of a beam position monitor for the high current proton linac. Chinese Physics C, 2009, 33(3): 240-244. doi: 10.1088/1674-1137/33/3/015
[18]	ZHANG Lei , MA Hui-Zhou , YUE Jun-Hui , LEI Ge , CAO Jian-She , MA Li . Design of BEPCⅡ bunch current monitor system. Chinese Physics C, 2008, 32(3): 218-221. doi: 10.1088/1674-1137/32/3/012
[19]	CHU Jian-Hua , TONG De-Chun , ZHAO Zhen-Tang . RF measurements of a C-band cavity beam position monitor. Chinese Physics C, 2008, 32(5): 385-388. doi: 10.1088/1674-1137/32/5/012
[20]	CHU Jian-Hua , ZHAO Zhen-Tang . The Design of C-Band Cavity Type Beam Position Monitor. Chinese Physics C, 2006, 30(4): 344-348.

Access

Get Citation

SU Jia-Hang, DU Ying-Chao, HUA Jian-Fei, ZHENG Shu-Xin, QIU Jia-Qi, YANG Jin, HUANG Wen-Hui, CHEN Huai-Bi and TANG Chuan-Xiang. Design and cold test of a rectangular cavity beam position monitor[J]. Chinese Physics C, 2013, 37(1): 017002. doi: 10.1088/1674-1137/37/1/017002

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2012-03-02
Revised: 1900-01-01

Article Metric

Article Views(2133)
PDF Downloads(284)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Design and cold test of a rectangular cavity beam position monitor

Corresponding author: SU Jia-Hang,

Received Date: 2012-03-02

Accepted Date: 1900-01-01

Available Online: 2013-01-05

Abstract: CBPM is a kind of monitor which is used for the measurement of beam transverse position. And it is more and more popular for its high potential in the resolution performance. In theory, the resolution can reach about 1 nanometer. In this paper, a rectangular CBPM is designed for it has better X-Y isolation than a cylinder one. It has been simulated and measured, and the results agree with each other very well. The procedures and results for the simulation and the cold test will be shown later and it will be proved that this is a reliable method for the CBPM design.

HTML

Reference (1)

Design and cold test of a rectangular cavity beam position monitor

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article