Measurement and analysis of fission rates in a spherical mockup of uranium and polyethylene

Get Citation
ZHU Tong-Hua, YANG Chao-Wen, LU Xin-Xin, LIU Rong, HAN Zi-Jie, JIANG Li and WANG Mei. Measurement and analysis of fission rates in a spherical mockup of uranium and polyethylene[J]. Chinese Physics C, 2013, 37(12): 124001. doi: 10.1088/1674-1137/37/12/124001
ZHU Tong-Hua, YANG Chao-Wen, LU Xin-Xin, LIU Rong, HAN Zi-Jie, JIANG Li and WANG Mei. Measurement and analysis of fission rates in a spherical mockup of uranium and polyethylene[J]. Chinese Physics C, 2013, 37(12): 124001.  doi: 10.1088/1674-1137/37/12/124001 shu
Milestone
Received: 2013-02-27
Revised: 1900-01-01
Article Metric

Article Views(1671)
PDF Downloads(249)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Measurement and analysis of fission rates in a spherical mockup of uranium and polyethylene

    Corresponding author: ZHU Tong-Hua,
    Corresponding author: HAN Zi-Jie,

Abstract: Measurements of the reaction rate distribution were carried out using two kinds of Plate Micro Fission Chamber (PMFC). The first is a depleted uranium chamber and the second an enriched uranium chamber. The material in the depleted uranium chamber is strictly the same as the material in the uranium assembly. With the equation solution to conduct the isotope contribution correction, the fission rate of 238U and 235U were obtained from the fission rate of depleted uranium and enriched uranium. Then, the fission count of 238U and 235U in an individual uranium shell was obtained. In this work, MCNP5 and continuous energy cross sections ENDF/BV.0 were used for the analysis of fission rate distribution and fission count. The calculated results were compared with the experimental ones. The calculation of fission rate of DU and EU were found to agree with the measured ones within 10% except at the positions in polyethylene region and the two positions near the outer surface. Because the fission chamber was not considered in the calculation of the fission counts of 238U and 235U, the calculated results did not agree well with the experimental ones.

    HTML

Reference (1)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return