Simulation and design of an X-band overmoded input cavity

Yang Wu; Yong-Dong Chen; De-Kui Zhao

doi:10.1088/1674-1137/40/6/067002

Chinese Physics C> 2016, Vol. 40> Issue(6) : 067002 DOI: 10.1088/1674-1137/40/6/067002

Simulation and design of an X-band overmoded input cavity

1.
Institute of Applied Electronics, China Academy of Engineering Physics, Mianyang 621900, China
2.
Sciebce and Technology on High Power Microwave Laboratory, Mianyang 621900, China
3.
Sichuan University of Science and Engineering, Zigong 643000, China

Abstract
HTML
Reference
Related

PDF

Abstract：
The RF input cavity is an important component for velocity-modulating types of microwave device, providing velocity modulation and density modulation. Conventional RF input cavities, however, encounter the problem of power capacity in the high frequency band due to the scaling law of the working frequency and device size. In this paper, an X-band overmoded input cavity is proposed and investigated. A resonant reflector is employed to reflect the microwave and isolate the input cavity from the diode and RF extractor. The resonant property of the overmoded input cavity is proved by simulations and cold tests, with PIC simulation showing that with a beam voltage of 600 kV and current of 7 kA, an input power of 90 kW is sufficient to modulate the beam with a modulation depth of 3%.
- X-band ,
- overmoded input cavity ,
- relativistic klystron amplifier ,
- phase-locked oscillator

References

[1]	M. Friedman, J. Krall, Y. Y. Lau and V. Serlin, J. Appl. Phys., 64:3353(1988)
[2]	G.Caryotakis. Phys. Plasmas, 5:1590(1998)
[3]	Y. Wu, H. Q. Xie, Z. H. Li, Y. J. Zhang and Q. S. Ma., Phys. Plasmas, 20:113102(2013)
[4]	M. Friedman, J. Pasour and D. Smithe, Appl. Phys. Lett., 71:3724(1997)
[5]	R. Z. Xiao, C. H. Chen, X. W. Zhang and J. Sun, J. Appl. Phys., 105:053306(2009)
[6]	R. Z. Xiao, C. H. Chen, J. Sun, X. W. Zhang and L. J. Zhang, Appl. Phys. Lett., 98:101502(2011)
[7]	W. Song, J. Sun, H. Shao, R. Z. Xiao, C. H. Chen and G. Z. Liu, J. Appl. Phys., 111:023302(2012)
[8]	R. Z. Xiao, C. H. Chen, W. Song, X. W. Zhang, J. Shun, Z. M. Song, L. J. Zhang and L. G. Zhang, J. Appl. Phys., 110:013301(2011)
[9]	J. Zhou, D. G. Liu, C. Liao and Z. H. Li, IEEE Trans. Plasma Sci., 37:2002(2009)

[1]	WU Qing , ZHOU Li-Juan , XIANG Qian-Fei , MA Wei-Xing . Multiquark cluster form factors in the relativistic harmonic oscillator model. Chinese Physics C, 2015, 39(1): 013102. doi: 10.1088/1674-1137/39/1/013102
[2]	SHU Guan , ZHAO Feng-Li , HE Xiang . RF study of a C-band barrel open cavity pulse compressor. Chinese Physics C, 2015, 39(5): 057005. doi: 10.1088/1674-1137/39/5/057005
[3]	WU Yang , ZHAO De-Kui , CHEN Yong-Dong . Design of a C-band relativistic extended interaction klystronwith coaxial output cavity. Chinese Physics C, 2015, 39(7): 077005. doi: 10.1088/1674-1137/39/7/077005
[4]	WU Yang , XIE Hong-Quan , XU Zhou . Mode control in a high gain relativistic klystron amplifier with 3 GW output power. Chinese Physics C, 2014, 38(1): 017001. doi: 10.1088/1674-1137/38/1/017001
[5]	MA Qiao-Sheng , LIU Zhong , LI Zheng-Hong , JIN Xiao . Development of the relativistic backward wave oscillator with a permanent magnet. Chinese Physics C, 2012, 36(8): 753-755. doi: 10.1088/1674-1137/36/8/012
[6]	Ru no . Development of X-band accelerating structuresfor high gradients. Chinese Physics C, 2012, 36(7): 639-647. doi: 10.1088/1674-1137/36/7/013
[7]	WU Yang , XU Zhou , LI Zheng-Hong , MA Qiao-Sheng , TANG Chuan-Xiang . High efficiency X-band relativistic backward wave oscillator with non-uniform slow wave structures. Chinese Physics C, 2012, 36(8): 750-752. doi: 10.1088/1674-1137/36/8/011
[8]	ZHANG Yun-Jian , MA Qiao-Sheng , LUO Xiong . Study of a compact external magnetic field radial split-cavity oscillator. Chinese Physics C, 2011, 35(4): 381-386. doi: 10.1088/1674-1137/35/4/011
[9]	LI Zheng-Hong , XIE Hong-Quan . RF phase jitter in a klystron amplifier. Chinese Physics C, 2011, 35(9): 851-854. doi: 10.1088/1674-1137/35/9/012
[10]	MA Qiao-Sheng , ZHANG Yun-Jian , DENG De-Rong , TAN Jie , LIU Zhong . Design of a high-efficiency C-band backward wave oscillator. Chinese Physics C, 2010, 34(7): 1016-1018. doi: 10.1088/1674-1137/34/7/016
[11]	LI Zheng-Hong , ZHANG Hong , JU Bing-Quan , SU Chang , WU Yang . Mode control in a high-gain relativistic klystron amplifier. Chinese Physics C, 2010, 34(5): 598-602. doi: 10.1088/1674-1137/34/5/017
[12]	MA Qiao-Sheng , FAN Zhi-Kai , ZHOU Chuan-Ming . Simulation of the relativistic backward wave oscillator with a sinusoidal guiding magnetic field. Chinese Physics C, 2009, 33(3): 232-235. doi: 10.1088/1674-1137/33/3/013
[13]	WANG Er-Dong , WANG Fang , ZHANG Bao-Cheng , ZHAO Kui , , . Stop band characteristics of a TESLA cavity coaxial-type HOM coupler. Chinese Physics C, 2009, 33(5): 401-405. doi: 10.1088/1674-1137/33/5/017
[14]	BEI Hua , DENG Hai-Xiao , DAI Zhi-Min . Design of EPU oscillator cavity in femtosecond accelerator. Chinese Physics C, 2009, 33(S2): 93-95. doi: 10.1088/1674-1137/33/S2/024
[15]	HE Xiao-Dong , WU Cong-Feng , FENG Guang-Yao , DONG Sai , PEI Yuan-Ji . Physical calculation for an X-band hybrid dielectric-iris-loaded accelerator. Chinese Physics C, 2009, 33(S2): 109-111. doi: 10.1088/1674-1137/33/S2/028
[16]	TANG Chuan-Xiang , LIU Xiao-Han . Ultra-low emittance X-band photocathode RF gun. Chinese Physics C, 2009, 33(S2): 102-104. doi: 10.1088/1674-1137/33/S2/026
[17]	CHU Jian-Hua , TONG De-Chun , ZHAO Zhen-Tang . RF measurements of a C-band cavity beam position monitor. Chinese Physics C, 2008, 32(5): 385-388. doi: 10.1088/1674-1137/32/5/012
[18]	HUANG Hua , FENG Di-Chao , LUO Guang-Yao , CHEN Zhi-Gang , LEI Lu-Rong , LIAO Yong , ZHANG Yun-Jian , YU Ai-Ming , TAN Jie , YANG Zhou-Bin , JIN Xiao , MENG Fan-Bao . Repetitive Operation of an S-Band, Short Pulse Relativistic Klystron Amplifier. Chinese Physics C, 2007, 31(3): 288-291.
[19]	MA Qiao-Sheng , LI Zheng-Hong , MENG Fan-Bao , GAN Yan-Qing , LIU Zhong , CHANG An-Bi , ZHOU Chuan-Ming . Experimental Investigation Of repetitive X-band Quasi-Periodic RF Cavity for High Power Microwave Soruce. Chinese Physics C, 2005, 29(10): 1002-1005.
[20]	MA Qiao-Sheng , LIU Qing-Xiang , SU Chang , FAN Zhi-Kai , CHANG An-Bi , HU Hai-Ying . Experimental Investigation of the X-Band Transit-Time Tube Oscillator. Chinese Physics C, 2003, 27(6): 542-545.

Access

Get Citation

Yang Wu, Yong-Dong Chen and De-Kui Zhao. Simulation and design of an X-band overmoded input cavity[J]. Chinese Physics C, 2016, 40(6): 067002. doi: 10.1088/1674-1137/40/6/067002

Yang Wu, Yong-Dong Chen and De-Kui Zhao. Simulation and design of an X-band overmoded input cavity[J]. Chinese Physics C, 2016, 40(6): 067002. doi: 10.1088/1674-1137/40/6/067002 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2015-05-06

Fund

Supported by Talent Introduction Profect of Sichuan University of Science and Engineering (2013 RC09)

Article Metric

Article Views(1535)
PDF Downloads(35)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Simulation and design of an X-band overmoded input cavity

Corresponding author: Yong-Dong Chen,

1. Institute of Applied Electronics, China Academy of Engineering Physics, Mianyang 621900, China

2. Sciebce and Technology on High Power Microwave Laboratory, Mianyang 621900, China

3. Sichuan University of Science and Engineering, Zigong 643000, China

Received Date: 2015-05-06

Available Online: 2016-06-05

Fund Project: Supported by Talent Introduction Profect of Sichuan University of Science and Engineering (2013 RC09)

Abstract: The RF input cavity is an important component for velocity-modulating types of microwave device, providing velocity modulation and density modulation. Conventional RF input cavities, however, encounter the problem of power capacity in the high frequency band due to the scaling law of the working frequency and device size. In this paper, an X-band overmoded input cavity is proposed and investigated. A resonant reflector is employed to reflect the microwave and isolate the input cavity from the diode and RF extractor. The resonant property of the overmoded input cavity is proved by simulations and cold tests, with PIC simulation showing that with a beam voltage of 600 kV and current of 7 kA, an input power of 90 kW is sufficient to modulate the beam with a modulation depth of 3%.

HTML

Reference (9)

Simulation and design of an X-band overmoded input cavity

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article