-
Abstract:
The quality of PMT signals is crucial for large-size and high-precision neutrino experiments, but most of these experiments are affected by the overshoot of PMT signals from the positive HV-single cable scheme. Overshoot affects the trigger, dead time and charge measurement from a detector. For the JUNO prototype detector, we have performed a detailed study and calculation on PMT signal overshoot to control the ratio of overshoot to signal amplitude to ~1%, with no effect on other PMT parameters.
-
-
References
[1]
|
An F et al, Neutrino Physics with JUNO, J. Phys. G, 36:030401(2016) |
[2]
|
X. C. Lei, Y. K. Heng, S. Qian et al, Chin. Phys. C, 36 (2):26002-026002(2016) |
[3]
|
F. P. An et al, Nucl. Instrum. Methods A, 685:78-97(2012) |
[4]
|
G. Alimonti et al, Nucl. Instrum. Methods A, 600 (3):568-593(2009) |
[5]
|
A. Baldini, C. Bemporad, E. Caffau et al, Nucl. Instrum. Meth. A, 372 (1-2):207-221(1996) |
[6]
|
C. Bauer, E. Borger, R. Hofacker et al, Journal of Instrumentation, 6:P06008(2011) |
[7]
|
Y. Abe et al, Phys. Rev. D, 86 (5):052008(2012) |
[8]
|
S. Abe et al, Phys. Rev. Lett, 100 (22):221803(2008) |
[9]
|
J. Q. Meindl, Reconstruction and Measurement of Cosmogenic Signals in the Neutrino Experiment Borexino (Ph.D Thesis),Munchen:Technische Universitat Munchen, 2013 |
[10]
|
F. Beissela, A. Cabrera, A. Cucoanes et al, Journal of Instrumentation, 8:T01003(2013) |
[11]
|
S. Jetter, D. DWYER, W. Q. Jiang, Chin. Phys. C, 36 (8):733-741(2012) |
[12]
|
K. K. Hamamatsu Photonics, Photomultiplier Tubes:Basics and Applications, Third edition (2007) |
[13]
|
W. L. Zhong, J. C. Liu, G. C. Yang et al, Chin. Phys. C, 31 (05):481-486(2007) |
-
-
Access
-
-