Physical design of a 10 MeV LINAC for polymer radiation processing

Get Citation
FENG Guang-Yao, PEI Yuan-Ji, WANG Lin, ZHANG Shan-Cai, WU Cong-Feng, JIN Kai and LI Wei-Min. Physical design of a 10 MeV LINAC for polymer radiation processing[J]. Chinese Physics C, 2009, 33(S2): 135-138. doi: 10.1088/1674-1137/33/S2/035
FENG Guang-Yao, PEI Yuan-Ji, WANG Lin, ZHANG Shan-Cai, WU Cong-Feng, JIN Kai and LI Wei-Min. Physical design of a 10 MeV LINAC for polymer radiation processing[J]. Chinese Physics C, 2009, 33(S2): 135-138.  doi: 10.1088/1674-1137/33/S2/035 shu
Milestone
Received: 2009-01-05
Revised: 1900-01-01
Article Metric

Article Views(3319)
PDF Downloads(637)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Physical design of a 10 MeV LINAC for polymer radiation processing

    Corresponding author: FENG Guang-Yao,

Abstract: 

In China, polymer radiation processing has become one of the most important
processing industries. The radiation processing source may be an electron beam accelerator or a radioactive source. Physical design of an electron beam facility applied for radiation crosslinking is introduced in this paper because of it's much higher dose rate and efficiency. Main part of this facility is a 10 MeV travelling wave electron linac with constant impedance accelerating structure. A start to end simulation concerning the linac is reported in this paper. The codes Opera-3d, Poisson-superfish and Parmela are used to describe electromagnetic elements of the accelerator and track particle distribution from the cathode to the end of the linac. After beam dynamic optimization, wave phase velocities in the structure have been chosen to be 0.56, 0.9 and 0.999 respectively. Physical parameters about the main elements such as DC electron gun, iris-loaded periodic structure, solenoids, etc, are presented. Simulation results proves that it can satisfy the industrial requirement. The linac is under construction. Some components have been finished. Measurements proved that they are in a good agreement with the design values.

    HTML

Reference (1)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return