×
近期发现有不法分子冒充我刊与作者联系,借此进行欺诈等不法行为,请广大作者加以鉴别,如遇诈骗行为,请第一时间与我刊编辑部联系确认(《中国物理C》(英文)编辑部电话:010-88235947,010-88236950),并作报警处理。
本刊再次郑重声明:
(1)本刊官方网址为cpc.ihep.ac.cn和https://iopscience.iop.org/journal/1674-1137
(2)本刊采编系统作者中心是投稿的唯一路径,该系统为ScholarOne远程稿件采编系统,仅在本刊投稿网网址(https://mc03.manuscriptcentral.com/cpc)设有登录入口。本刊不接受其他方式的投稿,如打印稿投稿、E-mail信箱投稿等,若以此种方式接收投稿均为假冒。
(3)所有投稿均需经过严格的同行评议、编辑加工后方可发表,本刊不存在所谓的“编辑部内部征稿”。如果有人以“编辑部内部人员”名义帮助作者发稿,并收取发表费用,均为假冒。
                  
《中国物理C》(英文)编辑部
2024年10月30日

Study on Design of Proton Linacs

  • Two important directions in the development of proton linacs are high-current proton linacs (mainly applied in nuclear power field) and compact proton linacs (for proton therapy). There are some common characteristics in them: 1. Employment of the novel accelerating structures, which are combination and evolution of the conventional ones; 2. Accelerating beam with small emittance; 3. Requirement for high reliability. The construction of the former is, however, much more difficult because it needs low beam lose rate and as high power transformation efficiency as possible. In this paper some important problems in the design of these accelerators are discussed and some schemes designed by us are presented.
  • 加载中
  • [1] Lagniel J M.Proc.Euro.Part.Accel.Conf.,1998.932 Akaoka N et al.Proc.Part.Accel.Conf.,1999.35463 Tooker J,Lawrence G.Proc.Part.Accel.Conf.,1999.35674 Gardner I S K.Proc.Euro.Accel.Conf.,1998.985 Avignone III F T,Gabriel T A(ed).The Savannah River Accelerator Project and Complementary Spallation Neutron Sources.Singapore:World Scientific,19986 Hamm R H,Crandall K R,Potter J M.Proc.Part.Accel.Conf.,1991.25837 ZHOU Li-Nong et al.High Energy Phys.and Nucl.Phys.,1998,22:1042(in Chinese)(周立农等.高能物理与核物理,1998,22:1042)8 YU Qing-Chang et al.Foundations of Protontherapy Technology.Beijing:Atomic Energy Press,1999(in Chinese)(郁庆长等.质子治疗技术基础.北京:原子能出版社,1999)9 GUO Wei-Ming,YU Qing-Chang.High Energy Phys.and Nucl.Phys.,2000,24(3):262(in Chinese)(郭伟明,郁庆长.高能物理与核物理,2000,24(3):262)10 Kato T.KEK Peport 92–1011 Los Alamos National Laboratory Report LA-12668 MS,199312 Bourat C,Perraudin C.Proc.Part.Accel.Conf.,1997.119113 D’Auria G,Rossi C.Proc.Part.Accel.Conf.,1997.118014 Benincasa G et al.High Frequency Proton Linac.In:Amaldi U,Grandolfo M,PicardiL ed.The RITA Network and Design of Compact Proton Accelerators.Frascati:INFN,1996.21515 Billen J H et al.Proc.Inter.Linac.Conf.,1994,34116 Swenson D A et al.Proc.Inter.Linac.Conf.,1994.80417 Tepliakov V A.Proc.Inter.Linac.Conf.,1992.2118 Shepard K W,Kedzie M.Proc.Part.Accel.Conf.,1999,95519 Jameson R A.Proc.2nd Inter.Symp.Adv.Nucl.Ener.Research,Japan:Ibaraki,1990.16320 Ryne R et al.Proc.Part.Accel.Conf.,1995.319721 OUYANG Hua-Fu,YU Qing-Chang.High Energy Phys.and Nucl.Phys.,1999,23:65(in Chinese)(欧阳华甫,郁庆长.高能物理与核物理,1999,23:65)22 Takeda H et al.Proc.Part.Accel.Conf.,1995.1140
  • 加载中

Get Citation
YU Qing-Chang. Study on Design of Proton Linacs[J]. Chinese Physics C, 2001, 25(5): 429-436.
YU Qing-Chang. Study on Design of Proton Linacs[J]. Chinese Physics C, 2001, 25(5): 429-436. shu
Milestone
Received: 2000-03-01
Revised: 1900-01-01
Article Metric

Article Views(2811)
PDF Downloads(589)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Study on Design of Proton Linacs

    Corresponding author: YU Qing-Chang,
  • Institute of High Energy Physics, The Chinese Academy of Sciences, Beijing 100039, China

Abstract: Two important directions in the development of proton linacs are high-current proton linacs (mainly applied in nuclear power field) and compact proton linacs (for proton therapy). There are some common characteristics in them: 1. Employment of the novel accelerating structures, which are combination and evolution of the conventional ones; 2. Accelerating beam with small emittance; 3. Requirement for high reliability. The construction of the former is, however, much more difficult because it needs low beam lose rate and as high power transformation efficiency as possible. In this paper some important problems in the design of these accelerators are discussed and some schemes designed by us are presented.

    HTML

Reference (1)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return